BMW 2009 Z4 sDrive30i Manual Do Proprietário

Refere

nce

At a glan

ivi

g ti

Commu

nication

Navigation

Ente

nme

lity

Dynamic Driving Control

The concept

Dynamic Driving Control can be used to adjust
the driving dynamics of the vehicle.
Several programs are available for this purpose;
they can be activated using the two Dynamic
Driving Control buttons.
The following characteristics are adapted,
depending on which program was selected:

Engine response.

Shift times of the automatic transmission

Power steering support

Changes in the suspension characteristics
through damping control

Vehicle stabilization through DSC Dynamic
Stability Control.

Operating the programs

1 You can activate or deactivate the following

programs using this button:

DSC OFF

TRACTION

2 You can activate or deactivate the following

programs using this rocker switch:

SPORT+

SPORT

NORMAL

DSC OFF

Driving stability is limited during acceleration
and when driving in bends.
To increase vehicle stability, activate DSC again
as soon as possible.

Activating DSC OFF

Press and hold the button, but not
longer than approx. 10 seconds, until

the indicator lamp for the DSC lights up in the
instrument cluster and DSC OFF is displayed in
the instrument cluster.
The DSC system is switched off.

Deactivating DSC OFF

Press the button.
DSC OFF and the DSC indicator lamp

go out.

For better control

DSC OFF is briefly displayed in the instrument
cluster.

The indicator lamp lights up: DSC is
deactivated.

TRACTION

Maximum traction on loose road surfaces. DTC
Dynamic Traction Control is switched on. Driv-
ing stability is limited during acceleration and
when driving in bends.

Activating TRACTION

Press the button.
TRACTION is displayed in the instru-

ment cluster.