BMW 2009 650i Coupe Manual Do Proprietário
51
Seat, mirror and steering
wheel memory
You can store and select three different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Switch on radio readiness or ignition, refer
to page
to page
2.
Set the desired seat, exterior mirror and
steering wheel positions.
steering wheel positions.
3.
Press the
button:
The LED in the button lights up.
4.
Press the desired memory button
1, 2 or 3:
The LED goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.
the seat or steering wheel.
<
Comfort mode
1.
Open the driver's door after unlocking or
switch on radio readiness, refer to page
switch on radio readiness, refer to page
.
2.
Briefly press the desired memory button
1,
2 or 3.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
The adjusting procedure for the steering wheel
is interrupted if you briefly press the switch for
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
The adjusting procedure for the steering wheel
is interrupted if you briefly press the switch for
the steering wheel adjustment in any direction,
refer to page
refer to page
.
Safety feature
1.
Close the driver's door and switch ignition
on or off, refer to page
on or off, refer to page
2.
Press the desired memory button
1, 2 or 3
and maintain pressure until the adjustment
process has been completed.
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
Requesting with remote control
The last positions of the driver's seat, external
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
You can select
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
You can select
*
when the position is requested.
>
Request when unlocking vehicle
>
Request when opening driver's door. In the
Convertible, only this function is used.
Convertible, only this function is used.
When using this feature, always make
sure that the footwell behind the driver's
sure that the footwell behind the driver's
seat is empty and unobstructed. Failure to do
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
so could cause injury to persons or damage to
objects behind the seat as a result of a rearward
movement of the seat.
<
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
iDrive, for operating principle refer to page
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
iDrive, for operating principle refer to page
.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
troller.
Online Edition for Part no. 01 41 2 600 759 - © 08/08 BMW AG