BMW 2009 M6 Coupe Manual Do Proprietário

226

5-watt bulb, W5W

1.

Push a screwdriver from the left under the 
lamp and pry out the lamp toward the right.

2.

Turn the bulb holder to the left by 90

5 and 

remove.

3.

Remove and replace the bulb.

To repair a flat tire, an M Mobility System is pro-
vided in the BMW M6. Using this system you 
can apply a sealant in the inside of the tire, seal 
off the damaged area, restore the tire inflation 
pressure and then continue driving.

Safety measures in case of a breakdown:
Park the vehicle as far as possible from 

passing traffic and on solid ground. Switch on 
the hazard warning flashers.
Apply the handbrake and shift into first gear or 
reverse with the manual transmission, or move 
the selector lever into a drive position with the 
sequential transmission. Have all vehicle occu-
pants get out of the vehicle and ensure that they 
remain outside the immediate area in a safe 
place, such as behind a guardrail. 
If a warning triangle

or portable hazard warning 

lamp

 is required, set it up on the roadside at an 

appropriate distance from the rear of the vehi-
cle. Comply with all safety guidelines and regu-
lations.

<

The M Mobility System is located in the cargo 
bay under the floor panel flap.
Do not remove foreign bodies which have pen-
etrated the tire if possible.

Corresponding information on using the 
M Mobility System are also provided on 

the device.

<

Before using the M Mobility System, 
observe the information on the sealant 

bottle.

<

Pull the sticker for the speed limit off the sealant 
bottle and apply it to the steering wheel.

Please observe the best-by date on the 
sealant bottle.

<

1 Sealant bottle and sticker with speed limit
2 Filling hose from sealant bottle to wheel

Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG