BMW 2009 M6 Coupe Manual Do Proprietário

 237

Only attach tow ropes to the tow fittings, as 
attachment to other vehicle parts can lead to 
damage.

<

Do not tow the vehicle with only the front 
or rear axle raised, as otherwise the 

engine may be damaged or the steering can 
turn to the left or right.

<

Have the vehicle transported on a flatbed sur-
face only.

Do not tow-start the vehicle if possible, but 
instead start the engine by means of jump start-
ing, refer to page

. Vehicles equipped with a 

catalytic converter should only be tow-started 
when the engine is cold.

1.

Switch on the hazard warning flashers, 
comply with country-specific regulations.

2.

Switch on the ignition, refer to page

.

3.

Shift into 3rd gear.

4.

Tow-start with the clutch completely 
depressed and slowly release the clutch. 
After the engine starts, immediately 
depress the clutch again completely.

5.

Stop at a suitable location, remove the tow 
bar or rope and switch off the hazard warn-
ing flashers.

6.

Have the vehicle checked.

1.

Switch on the hazard warning flashers, 
comply with country-specific regulations.

2.

Switch on the ignition, refer to page

3.

Tow-start in selector lever position N.

4.

Move the selector lever into the drive posi-
tion and pull toward + within 2 seconds. 
The correct gear will be selected and 
engaged automatically.

5.

Stop at a suitable location, remove the tow 
bar or rope and switch off the hazard warn-
ing flashers.

6.

Have the vehicle checked.

Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG