BMW 2009 M6 Coupe Manual Do Proprietário

Página de 270
Adjusting
50
5.
Change to upper field if necessary. Turn the 
controller until "Door locks" is selected and 
press the controller.
6.
Select  "Central locking" and press the con-
troller.
7.
Select "Last seat pos." and press the con-
troller.
8.
Select "After unlocking"
*
 or "After door 
opened".
9.
Press the controller.
To cancel the request: 
Select "Deactivated" and press the controller.
Front head restraints
A correctly adjusted head restraint reduces the 
risk of spinal injury in the event of an accident.
Adjust the head restraint so that its center 
is approximately at ear level. Otherwise 
there is increased danger of injury in the event 
of an accident.Only remove the head restraints 
if no one will be sitting on the seat in question. 
Reinstall the head restraints before transport-
ing passengers, as otherwise the head restraint 
cannot provide its protective function.
<
Active front head restraints
In the event of a rear-end collision of sufficient 
severity, the active head restraint reduces the 
distance to the head.
Do not use seat covers or head restraint 
covers that could impede the proper 
functioning of the active head restraint. Other-
wise, there is no assurance that the active head 
restraint will perform its protective function and 
it is not possible to take advantage of its injury-
reducing potential in the event of a rear-end 
collision.
Have the active head restraints reset after they 
are triggered in a rear-end collision. Only have 
this work carried out by a BMW center or a 
workshop that works according to BMW repair 
procedures with correspondingly trained per-
sonnel. Otherwise, this safety equipment will 
not function properly.
<
Please contact a BMW center if you wish 
to have the front head restraints removed 
and installed.
<
Coupe
Height adjustment
>
To raise: pull the head restraint upward.
>
To lower: slide the head restraint down-
ward.
To reach the lowest position, press the 
button, refer to arrow 
1.
<
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG