BMW 2009 M6 Coupe Manual Do Proprietário

88

sage "Initializing FTM ..." appears on the 
Control Display for a few seconds.

3.

Start to drive.
The initialization finishes during driving 
without feedback.

Via iDrive, for operating principle refer to 
page

:

1.

Press the 

 button. 

This opens the start menu.

2.

Press the controller to open the  menu.

3.

Turn the controller until "Settings" is 
selected and press the controller.

4.

Select "Vehicle / Tires" and press the con-
troller.

5.

Change to upper field if necessary. Turn the 
controller until "FTM" is selected and press 
the controller.

6.

Start the engine, but do not start driving.

7.

Select "Reset" and press the controller.

8.

Select "Yes" and press the controller.

The message "resetting FTM …" is dis-
played for a few seconds. The warning lamp 
in the instrument cluster lights up yellow for 
a few seconds.

9.

Start to drive.
The initialization finishes during driving 
without feedback.

The warning lamp lights up red. A mes-
sage appears on the Control Display. 
In addition, an acoustic signal sounds. 

There is a flat tire or extensive inflation pressure 
loss.

1.

Reduce speed and stop the vehicle care-
fully. Avoid sudden braking and steering 
maneuvers.

2.

Identify damaged tire. To do this, check the 
tire inflation pressure using the M Mobility 
System, refer to Producing tire inflation 
pressure on page

.

3.

Repair flat tire with M Mobility System, refer 
to page

, or replace the damaged wheel, 

refer to Changing wheels on page

TPM checks the tire inflation pressure in the 
four mounted tires. The system reports when 
the tire inflation pressure has dropped consid-
erably in one or several tires.

Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG