BMW 2009 135i Coupe Manual Do Proprietário

52

Unusually rapid flashing of the indicator 
lamp and the turn signals indicates that 

one of the turn signal bulbs has failed.

<

Press the lever as far as the resistance point for 
as long as you wish to indicate a turn.

Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function:

1.

Switch on the ignition, refer to page

2.

Lightly push button

1 in the turn indicator 

lever up or down repeatedly until the sym-
bol appears in the display accompanied by 
the word "SET".

3.

Press button 

2.

4.

Lightly push button

1 in the turn indicator 

lever down repeatedly until the symbol 
appears in the display.

5.

Press button 

2.

6.

Use button 

1 to select:

>

Turn signals flash once.

>

Triple turn signal.

7.

Press button 

2.

The setting is stored for the remote control 
currently in use.

1 Switching on wipers
2 Switching off wipers or brief wipe
3 Activating/deactivating intermittent wipe or 

rain sensor

4 Cleaning windshield and headlamps

5 Setting speed for intermittent wipe, or sen-

sitivity of the rain sensor

Press the lever upward, arrow 

1.

The lever automatically returns to its initial posi-
tion when released.

Press once.
The system switches to operation in the inter-
mittent mode when the vehicle is stationary.

Press twice or press beyond the resistance 
point. 
The system switches to normal speed when the 
vehicle is stationary.

Online Edition for Part no. 01 41 2 600 853 - © 08/08 BMW AG