BMW 2009 535i Sedan Manual Do Proprietário

64

>

if you remove the remote control from the 
ignition lock

The handbrake is primarily intended to prevent 
the vehicle from rolling while parked; it brakes 
the rear wheels.

The indicator lamp lights up, and a sig-
nal also sounds when starting off. The 
handbrake is applied.
Indicator lamp for Canadian models.

The lever locks in position automatically.

Pull slightly upwards, press the button and 
lower the lever.

If exceptional circumstances should 
make it necessary to apply the handbrake 

while the vehicle is in motion, do not pull it too 
firmly. In doing so, continuously press the but-
ton of the handbrake lever. Otherwise, too firm 
an application of the handbrake can lock up the 
rear wheels and cause the rear of the car to 
swerve.

<

To prevent corrosion and one-sided brak-
ing action, occasionally apply the hand-

brake lightly when the vehicle is slowly coming 
to a stop if the traffic conditions are suitable. 
The brake lamps do not light up when the hand-
brake is applied.

<

While shifting in the 5th/6th gear lane, 
press the gearshift lever toward the right, 

otherwise accidental shifting into the 3rd or 4th 
gear could result in engine damage.

<

Select only when the vehicle is stationary. 
When pressing the gearshift lever to the left, 
overcome some resistance.

In addition to fully automatic operation, you can 
also manually shift with the Steptronic, refer to 
page

.

P R N D M/S + –

P R N D DS S1

 to S6

 M1 to M6

The transmission position is indicated, and in 
the manual mode, the gear currently engaged.

Online Edition for Part no. 01 41 2 600 721 - © 08/08 BMW AG