BMW 2009 328i xDrive Sports Wagon Manual Do Proprietário

Refere

nce

At a glan

ivi

g ti

icat

Navigation

Ente

nme

lity

1 Longitudinal direction
2 Height
3 Angle

4 Backrest
The head restraints are adjusted manually, refer
to Head restraints below.

Lumbar support*

You can also adjust the contour of the backrest
to obtain additional support in the lumbar
region.
The upper hips and spinal column receive sup-
plementary support to help you maintain a
relaxed, upright sitting position.

Increase or decrease curvature: press the
switch at the front or rear, respectively.

Shift curvature up or down: press the switch
at the top or bottom, respectively.

Backrest width*

You can change the width of the backrest to suit
your individual preferences by adjusting the lat-
eral-support pads.
Press the front or rear end of the switch.
Backrest width decreases or increases accord-
ingly.

Head restraints

A correctly adjusted head restraint reduces the
risk of neck injury in the event of an accident.

Adjust the head restraint in such a way
that its center is at approx. ear level. Oth-

erwise, there is an increased risk of injury in the
event of an accident. Only remove a head
restraint if no one will be sitting on the seat in
question. Reinstall the head restraint before
transporting anyone on that seat. Otherwise,
the passenger will be without protection from
the head restraint.

Front active head restraints

In a rear collision of a sufficient strength, the
active head restraint reduces the distance to
the head.

Do not use seat or head restraint covers
that could impair the function of the active

head restraint. Otherwise, the protective func-
tion of the active head restraint will not be
ensured and its full potential in reducing the risk
of injury in the event of a rear collision may not
be realized.
In the event of malfunctions, deactivation or

ba8_E9091_cic.book Seite 43 Mittwoch, 29. Oktober 2008 2:59 14