BMW 2008 X5 3.0si Manual Do Proprietário

Página de 292
 123
1.
Lay on the case on the left-hand side and 
push it forward, arrow
1.
2.
Swing the case toward the inside, refer to 
arrow
2.
3.
Push the case forward at the ends until it 
engages in the two side brackets.
4.
Check whether the case is properly locked 
in place by pulling it with a sudden move-
ment.
Cargo bay, expanding
The rear seat backrest is divided. You can fold 
down both sides separately in order to expand 
the cargo bay.
Reach into the recess and pull toward the front.
When you fold back the backrest, be sure 
that the catch engages securely. The red 
warning indicator disappears in the recess 
when the catch is engaged. If it is not properly 
engaged, transported cargo could enter the 
passenger compartment during braking or eva-
sive maneuvers and endanger the vehicle occu-
pants.
<
To ensure that the safety systems con-
tinue to provide optimized protection, 
please observe the safety belt information on 
page
<
Storage compartments in 
cargo bay
Depending on the vehicle's equipment, the fol-
lowing storage compartments are provided in 
the cargo bay.
>
Storage compartments behind the remov-
able side panels in the cargo bay on the 
right and left
*
 and under the floor panel flap.
>
Storage tray
under the floor panel flap, 
capacity approx. 21 US gal/80 liter.
>
Retaining straps
on the left and right side 
panel for securing small objects.
>
Hooks
*
, e.g. for hanging up shopping bags 
or carrier bags on the left and right in the 
cargo bay.
>
Net
on the left side panel of the cargo bay 
for smaller objects.
>
Lashing rail with lashing eyes
*
. You can 
secure heavy-duty cargo straps on the lash-
ing eyes.
They can be removed at the notches in the 
rails. To move the lashing eyes, press the 
button.
Read and comply with the information 
enclosed with the heavy-duty cargo 
straps.
<
Floor panel flap
To access the onboard toolkit etc.
To open, swing up the flap by the handle, refer 
to arrow.
The floor panel flap can be locked.
Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG