BMW 2008 X5 3.0si Manual Do Proprietário

56

1.

Secure the child restraint system with the 
belt.

2.

Pull out the belt webbing completely.

3.

Allow the belt webbing to be pulled in and 
pull taut against the child restraint system. 
The safety belt is locked.

1.

Open the belt buckle.

2.

Remove the child restraint system.

3.

Allow the belt webbing to be pulled in com-
pletely.

LATCH: Lower Anchor and Tethers for CHil-
dren.

Follow the system manufacturer's 
instructions on installation and use of 

LATCH child restraint systems; otherwise, their 
protective function may be reduced.

<

Before attaching the child's seat, pull the belt 
away from the region of the child restraint fixing 
system.

Before installing the child's seat, remove 
the covers

*

 from the mounts for the 

LATCH anchor fittings, as otherwise the 
LATCH anchor fittings have no restraining 
effect.

<

Make sure that the LATCH mounts have 
properly clicked into place and that the 

child restraint system is resting snugly against 
the backrest. Otherwise, the protective action 
may be reduced.

<

The anchor points for the LATCH anchors are 
located at the positions indicated by arrows in 
the gap between the seat and the backrest.

Only use the top tether mounting points 
to secure child restraint systems, other-

wise the mounting points could be damaged.
Do not mount child restraint systems on the 
3rd row seats, as otherwise the protection pro-
vided by these child restraint systems may be 
reduced.

<

There are three additional mounting points for 
child restraint systems with a tether strap on the 
2nd row seats, refer to arrows. Fold out before 
using the center mounting point.

Online Edition for Part no. 01 41 0 014 248 - © 08/07 BMW AG