BMW 2008 X6 xDrive35i Manual Do Proprietário
121
1 Brackets
2 Telescopic rail
3 Notch in the cargo bay rail
2 Telescopic rail
3 Notch in the cargo bay rail
Mounting brackets
The two brackets are connected with a tele-
scopic rail.
scopic rail.
1.
Insert the brackets at the respective notch
in the rail on the cargo bay floor.
in the rail on the cargo bay floor.
2.
Press down the brackets to push them into
the desired position.
the desired position.
3.
Check the firm seating of the brackets.
They must be clearly heard to engage.
They must be clearly heard to engage.
Do not lay cargo on the brackets, as oth-
erwise they could be unlocked.
erwise they could be unlocked.
<
Dividing up cargo bay
You can position the cargo as follows:
>
between the rear seat backrest and the
telescopic rail
telescopic rail
>
between the telescopic rail and the retain-
ing strap
ing strap
Positioning cargo between telescopic rail and
retaining strap:
retaining strap:
1.
Lay the cargo on the telescopic rail. Press
the button, arrow
the button, arrow
1, and route the retaining
strap around the cargo, arrow
2.
2.
Hook the retaining strap into the mount
3
on the telescopic rail.
3.
Press the button of the bracket, arrow
1.
The retaining strap is tensioned.
You can also hook both retaining straps
into each other.
into each other.
<
When you are finished using the adaptive fas-
tening system, unhook the retaining strap and
guide it back into the bracket in order to prevent
damage and injury.
Then slide the fastening system toward the
front in order to permit the best possible use of
the cargo bay.
tening system, unhook the retaining strap and
guide it back into the bracket in order to prevent
damage and injury.
Then slide the fastening system toward the
front in order to permit the best possible use of
the cargo bay.
Removing brackets
Press down the brackets, slide them up to the
notches of the rails and remove them.
Depending on your vehicle's equipment pack-
age, you can store the adaptive fastening sys-
tem under the floor panel in the cargo bay.
notches of the rails and remove them.
Depending on your vehicle's equipment pack-
age, you can store the adaptive fastening sys-
tem under the floor panel in the cargo bay.
Ski bag*
The ski bag is designed for safe, clean transport
of up to 4 pairs of standard skis or up to 2 snow-
boards.
With the ski bag you can stow skis with a length
of up to 6.9 ft/2.10 m. When skis of 6.9 ft/
2.10 m in length are loaded, the ski bag will tend
to contract, reducing its overall capacity.
of up to 4 pairs of standard skis or up to 2 snow-
boards.
With the ski bag you can stow skis with a length
of up to 6.9 ft/2.10 m. When skis of 6.9 ft/
2.10 m in length are loaded, the ski bag will tend
to contract, reducing its overall capacity.
Before loading the ski bag, fold in the dis-
play screen of the DVD system in the
play screen of the DVD system in the
rear
*
, as otherwise the display screen could be
damaged.
<
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG