BMW 2008 X6 xDrive35i Manual Do Proprietário

54

1.

Open the belt buckle.

2.

Remove the child restraint system.

3.

Allow the belt webbing to be pulled in com-
pletely.

LATCH: Lower Anchor and Tethers for CHil-
dren.

Follow the system manufacturer's 
instructions on installation and use of 

LATCH child restraint systems; otherwise, their 
protective function may be reduced.

<

Before attaching the child's seat, pull the belt 
away from the region of the child restraint fixing 
system.

Make sure that the LATCH mounts have 
properly clicked into place and that the 

child restraint system is resting snugly against 
the backrest. Otherwise, the protective action 
may be reduced.

<

The mounts for the LATCH anchors are located 
at the points indicated by the arrows.

Only use the top tether mounting points 
to secure child restraint systems, other-

wise the mounting points could be damaged.

<

For child restraint systems with tether strap, 
there are two additional attachment points on 
the back of the rear seat backrests, refer to 
arrows.

Make sure that the tether strap is not 
routed over sharp edges and does not 

twist on its way to the attachment point; other-
wise, the belt cannot properly secure the child 
restraint system in the event of an accident.

<

1 Direction of travel
2 Head restraint
3 Tether strap hook
4 Mounting point
5 Backrest
6 Tether strap of child restraint system

Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG