BMW 2008 X6 xDrive35i Manual Do Proprietário

Página de 288
 65
Fast wiper speed
Press twice or press beyond the resistance 
point. 
The system reverts to normal speed when the 
vehicle is stationary.
Rain sensor
The wiper operation is controlled automatically 
as a function of the intensity of the rain. The rain 
sensor is located on the windshield, directly in 
front of the interior rearview mirror.
Rain sensor activation
Press the button, arrow
3. The LED in the but-
ton lights up.
Adjusting sensitivity of rain sensor
Turn the knurled wheel
5.
Rain sensor deactivation
Press the button again, arrow
3. The LED goes 
out.
Deactivate the rain sensor when passing 
through an automatic car wash. Failure to 
do so could result in damage caused by undes-
ired wiper activation.
<
Cleaning windshield and headlamps*
Pull the lever, arrow
4.
The system sprays washer fluid against the 
windshield and activates the wipers for a brief 
period.
When the vehicle lighting system is switched 
on, the headlamps are also cleaned at regular 
and appropriate intervals.
Do not use the washers if there is any 
danger that the fluid will freeze on the 
windshield. If you do so, your vision could be 
obscured. To avoid freezing, use a washer fluid 
antifreeze, refer to Washer fluid. Do not use 
washing mechanisms when the washer fluid 
reservoir is empty, otherwise you will damage 
the washer pump.
<
Windshield washer nozzles
Both windshield washer nozzles are automati-
cally heated with the engine running or the igni-
tion switched on.
Washer fluid
Washer fluid antifreeze is flammable. For 
this reason, keep it away from ignition 
sources and store only in the closed original 
container out of reach of children. Otherwise, 
there is the danger of bodily injury. Always 
observe the instructions for use provided on the 
containers.
<
Filler neck for washer fluid
Only add washer fluid with the engine 
cooled down to exclude contact with hot 
engine components. Otherwise there is a dan-
ger of fire and to personal safety if the fluid is 
spilled.
<
All washer nozzles are supplied from one reser-
voir.
Fill with water and – if required – with a washer 
antifreeze, according to manufacturer's recom-
mendations.
In order to maintain the mixture ratio, mix 
the washer fluid before filling.
<
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG