BMW 2008 X6 xDrive35i Manual Do Proprietário

84

1.

Position the vehicle so that the turning lines 
guide within the limits of the parking space.

2.

Turn the steering wheel so that the pathway 
lines cover the corresponding turning lines.

This results in a steering wheel position that 
makes full use of the smallest possible turning 
circle of the vehicle when parking.

The displayed picture area is dependent on the 
current speed:
At low speeds, the camera view is panned 
toward the street, and at higher speeds toward 
the horizon.
This enables the currently relevant picture area 
to be shown enlarged on the Control Display.
To activate the virtual camera panning, select 
the camera view "Camera view: full screen", 
refer to Displays on page

.

Spatially shaped markings are shown in the pic-
ture of the rear view camera. Their stepped col-
ors correspond to the markings of the Park Dis-
tance Control and support you in estimating the 
distance to the object shown.
The obstacle marking is deactivated when driv-
ing in reverse from approx. 12 mph/20 km/h.

The driver assistance functions can be active at 
the same time. The zoom function for trailer 
towing can only be activated individually with 
the rear view camera switched on.

iDrive, for operating principle refer to page

1.

Press the controller.

2.

Select the desired function and press the 
controller.

You can also adjust the brightness of the cam-
era view.

1.

Press the 

 button.

This opens the start menu.

2.

Press the controller to open the   menu.

3.

Select "Settings" and press the controller.

4.

Select "Vehicle / Tires" and press the con-
troller.

5.

Change to upper field if necessary. Turn the 
controller until "Maneuvering aids" is 
selected and press the controller.

6.

Select "Settings" and press the controller.

7.

Select the desired functions and press the 
controller.

The settings are stored for the remote control 
currently in use.

Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG