BMW 2008 650i Coupe Manual Do Proprietário

Climate

110

In the highest setting you activate the maximum
heating output, regardless of the outside tem-
perature.

Adapting temperature in upper body

region

Press the button to display the current set-
ting on the Control Display.

Select the field by moving the controller and
adjust the temperature by turning the con-
troller.

You can also adjust the temperature in the
upper body region with iDrive.
iDrive, for operating principle refer to page

Open the start menu.

Open "Climate".

Select "Vent settings" and press the con-
troller.

Select the field by moving the controller and
adjust the temperature by turning the con-
troller.

Defrosting windows and removing
condensation

Quickly remove ice and condensa-
tion from the windshield and front
side windows.

To do this, also switch on the cooling function.

Rear window defroster

The rear window defroster
switches off automatically after a
certain amount of time.

Convertible: the rear window defroster is only
activated when the rear window is closed.
Depending on the vehicle equipment, upper
wires are used as an antenna and are not part of
the rear window defroster.

Air volume, manual

You can adjust the air volume by
turning. You can reactivate the
automatic mode for the air volume
with the AUTO button.

The air quantity is reduced and if need be, the
ventilation is switched off in order to reduce the
load on the battery. The display stays the same.

Air distribution, manual

You can route the air flowing out into the vehicle
interior via various programs, separately for the
driver's and passenger's side:

Upper body region

Upper body region and footwell

Footwell

Driver's side: windows and footwell

Individual program

Selecting program

Press the button repeatedly until
the desired air distribution of the
respective program is shown on
the Control Display.