BMW 2008 650i Coupe Manual Do Proprietário

185

It may not be possible to establish a telephone
connection using the mobile phone while a con-
nection is being established to BMW Assist
or while a call to BMW Assist is already in
progress. If this happens, you must unpair the
mobile phone and the vehicle if you wish to
place a call with the mobile phone.

Initial operation

Pairing mobile phone in vehicle

The following prerequisites must be met:

Suitable mobile phone: the mobile phone is
supported by the full mobile phone prepara-
tion package. Information on this subject is
also provided on the Internet at:
www.bmw.com

The mobile phone is ready to operate.

The Bluetooth links of the vehicle, refer to
page

189

, and the mobile phone are active.

Depending on the mobile phone, presets in
the mobile phone are required: e.g. via the
following menu items:

Bluetooth activated

Connection not with confirmation

Reconnect

Depending on the mobile phone model, the
setting energy saving mode can, for exam-
ple, result in vehicle failing to detect the
paired mobile phone.

Specify any desired number as the Blue-
tooth passkey, e.g. 1, for pairing. This Blue-
tooth passkey is no longer required follow-
ing successful pairing.

The ignition is switched on.

Only pair the mobile phone with the vehi-
cle stopped, otherwise the passengers

and other road users can be endangered due to
a lack of attentiveness on the part of the
driver.

Switching on ignition

Insert the remote control as far as possible
into the ignition lock.

Switch on the ignition by pressing the Start/
Stop button without depressing the brake
or clutch pedal.

Preparation via iDrive

iDrive, for operating principle refer to page

Press the

button to open the start

menu.

Press the controller to open the menu.

Select "Settings" and press the controller.

Select "Bluetooth" and press the controller.