BMW 2008 650i Coupe Manual Do Proprietário

Adju

sting

Change to upper field if necessary. Turn the
controller until "Door locks" is selected and
press the controller.

Select "Central locking" and press the con-
troller.

Select "Last seat pos." and press the con-
troller.

Select "After unlocking" or "After door
opened".

Press the controller.

To cancel the request:
Select "Deactivated" and press the controller.

Front head restraints

A correctly adjusted head restraint reduces the
risk of injury to cervical vertebrae in an accident.

Adjust the head restraint so that its center
is approx. at ear level. Otherwise, there is

increased danger of injury in the event of an
accident. Only remove the head restraints if no
one will be sitting on the seat in question. Rein-
stall the head restraints before transporting
passengers, as otherwise the head restraint
cannot provide its protective function.

Active front head restraints

In the event of a rear-end collision of sufficient
severity, the active head restraint reduces the
distance to the head.

Do not use seat covers or head restraint
covers that could impede the proper

functioning of the active head restraint. Other-
wise, there is no assurance that the active head
restraint will perform its protective function and
it is not possible to take advantage of its injury-
reducing potential in the event of a rear-end
collision.
Have the active head restraints reset after they
are triggered in a rear-end collision. Only have
this work carried out by a BMW center or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel. Otherwise, this safety equipment will
not function properly.

Please contact a BMW center if you wish
to have the front head restraints removed

and installed.

Coupe

Adjusting height

To raise: pull the head restraint upward.

To lower: slide the head restraint down-
ward.

To reach the lowest position, press the
button, refer to arrow