BMW 2008 135i Convertible Manual Do Proprietário
Adju
stmen
ts
50
Settings for the backrest width and lumbar sup-
port are not stored in memory.
port are not stored in memory.
Storing
1.
Switch on radio readiness or the ignition,
refer to page
refer to page
.
2.
Adjust the seat and exterior mirrors to the
desired positions.
desired positions.
3.
Press the
button.
The LED in the button lights up.
4.
Press the desired memory button
1 or 2: the
LED goes out.
Call-up
Do not call up memory while you are driv-
ing, otherwise unexpected seat move-
ing, otherwise unexpected seat move-
ment could result in an accident.
<
Convenience mode
1.
Unlock and open the driver's door or switch
on radio readiness, refer to page
on radio readiness, refer to page
.
2.
Lightly push the desired memory button
1
or
2.
The adjusting procedure is halted when you
touch a seat adjustment switch or one of
the memory buttons.
touch a seat adjustment switch or one of
the memory buttons.
Safety feature
1.
Close the driver's door and switch the igni-
tion on or off, refer to page
tion on or off, refer to page
2.
Press the desired memory button
1 or 2
and keep it pressed until the adjustment
process has been completed.
process has been completed.
If the
button was pressed accidentally:
Press the button again; the LED goes out.
Call-up with the remote control
The driver's seat position last stored is stored
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
for the remote control currently in use.
You can select the occasion on which the seat is
reset to that position.
>
Call-up when the vehicle is unlocked.
>
Call-up when the driver's door is opened.
When this Personal Profile function is
used, first make sure that the footwell
used, first make sure that the footwell
behind the driver's seat is free of obstacles.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.
Failure to do so could cause injury to persons or
damage to objects as a result of a rearward
movement of the seat.
<
The adjusting procedure is halted when you
touch a seat adjustment switch or one of the
memory buttons.
touch a seat adjustment switch or one of the
memory buttons.
Selecting automatic call-up
iDrive, for operating principle refer to page
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
troller.
5.
If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "Door locks" is selected and press the
controller.
the uppermost field. Turn the controller
until "Door locks" is selected and press the
controller.
6.
Select "Central locking" and press the con-
troller.
troller.
7.
Select "Last seat pos." and press the con-
troller.
troller.
Online Edition for Part no. 01 41 0 014 954 - © 02/08 BMW AG