BMW 2008 135i Convertible Manual Do Proprietário

Transporting child

ren safely

Allow the belt strap to retract and pull it taut
against the child-restraint system.

The safety belt is locked.

To unlock the safety belt

Open the belt buckle.

Remove the child-restraint system.

Allow the safety belt strap to retract all the
way.

LATCH child-restraint fixing

system

LATCH: Lower Anchors and Tethers for CHil-
dren.

To install and use the LATCH child
restraint system, follow the operating and

safety instructions provided by the manufac-
turer of the system, otherwise the protective
function of the seat may be compromised.

Before installing the child seat, pull the belt out
of the area for the child-restraint fixing system.

Ensure that both lower LATCH anchors
are correctly engaged and that the child

restraint system is resting firmly against the
backrest, otherwise the protective function of
the seat may be compromised.

Coupe: rear seats

The anchor points for the lower LATCH
anchors are located behind the labeled protec-
tive caps.

Convertible: rear seats

The anchor points for the lower LATCH
anchors are located at the positions indicated
by arrows, in the gap between the seat and the
backrest.

Coupe: child-restraint system with

tether strap

Use the top tether anchors to secure
child-restraint systems only, otherwise

the anchors could be damaged.

For child-restraint systems with tether straps
there are two additional anchors, see arrows.

Coupe: placement of the tether strap

Make sure the upper retaining strap does
not run over sharp edges and is not

twisted as it passes to the top anchor. Other-
wise the strap will not properly secure the child-
restraint system in the event of an accident.