BMW 2008 135i Convertible Manual Do Proprietário

chnology for

driving comfort

and

safe

Status indicator on the Control Display

The color of the wheels represents the status of
the tires and the system.
TPM takes into account that tire pressures
change while the vehicle is being driven. The
tire pressures do not need to be corrected
unless the TPM instructs you to do so by means
of color indicators.

Green

The tire inflation pressure corresponds to the
established target value.
"TPM active" appears on the Control Display.

One wheel yellow

There is a flat tire or substantial loss of tire pres-
sure in the indicated tire. A message appears on
the Control Display.

All wheels yellow

There is a flat tire or substantial loss of tire pres-
sure in several tires. A message appears on the
Control Display.

Gray

The system cannot detect a puncture.
Possible reasons for this:

TPM is being reset

Temporary malfunction caused by systems
or devices using the same radio frequency

Malfunction

Resetting the system

Each time a tire inflation pressure has
been corrected or a wheel or tire has been

changed, reset the system.

iDrive, for operating principle refer to page

Press the

button.

This opens the start menu.

Press the controller to open the menu.

Select "Settings" and press the controller.

Select "Vehicle / Tires" and press the con-
troller.

If necessary, move the highlight marker to
the uppermost field. Turn the controller
until "TPM" is selected and press the con-
troller.

Start the engine, but do not start driving.

Select "Reset" and press the controller.

Select "Yes" and press the controller.

Start to drive.
The wheels are shown in gray and "Reset-
ting TPM..." is displayed.

After driving a few minutes, the set inflation
pressures in the tires are accepted as the target
values to be monitored. The system reset is
completed during your drive, and can be inter-

will be adapted