BMW 2008 135i Coupe Manual Do Proprietário

Climate

AUTO program

The AUTO program adjusts the air
distribution to the windshield and
side windows, towards the upper

body area and into the footwell for you. The air
flow rate and your temperature specifications
will be adapted to outside influences as a result
of seasonal changes, e.g. sunlight or window
condensation.
The cooling is switched on automatically with
the AUTO program.

Intensity of the AUTO program

Press the AUTO button repeatedly to set the
intensity of the AUTO program. The current
setting is briefly displayed on the Control Dis-
play every time the button is pressed.
You can also set the intensity of the AUTO pro-
gram via iDrive.
iDrive, for operating principle refer to page

Press the

button.

This opens the start menu.

Call up "Climate".

Select "Automatic programs" and press the
controller.

Select the desired field.

Press the controller to set the desired inten-
sity.

The selected intensity level of the auto-

matic program is switched on.

Convertible program

When the convertible top is down, the Convert-
ible program becomes available for selection. In
the Convertible program, the automatic climate

control is optimized for driving with the convert-
ible top down. In addition, the air flow rate is
increased as vehicle speed increases.
When the Convertible program has been
selected, it is automatically activated every time
the convertible top is opened.

The effectiveness of the Convertible pro-
gram can be enhanced considerably by

installing the wind deflector.

Adjusting air flow rate manually

Press the left side of the button to
reduce airflow. Press the right side
of the button to increase it. You can

reactivate the automatic mode for the air flow
rate with the AUTO button.
The air flow rate may be reduced or the blower
may be switched off entirely to save on battery
power. The display remains the same.

Switching the system on/off

With the blower at its lowest setting, press the
left side of the button to switch off the auto-
matic climate control. All displays are cleared
except for the rear window defroster if it is
switched on.
Press any button except REST or rear window
defroster to reactivate the automatic climate
control.

Automatic recirculated-air control
AUC/Recirculated-air mode

Switch on the desired operating
mode by pressing this button
repeatedly:

LED off: outside air flows in continuously.

Left-hand LED on, AUC mode: a sensor
detects pollutants in the outside air. If nec-
essary, the system blocks the supply of out-
side air and recirculates the inside air. As
soon as the concentration of pollutants in
the outside air has decreased sufficiently,
the system automatically switches back to
outside air supply.

Right-hand LED on, recirculated-air mode:
the supply of outside air is permanently