BMW 2008 135i Coupe Manual Do Proprietário

177

When the status information "BMW Assist" or
"BMW Service" is displayed in "Communica-
tion", only BMW Assist calls are possible.
It may not be possible to establish a telephone
connection using the mobile phone while a con-
nection is being established to BMW Assist or
while a call to BMW Assist is already in
progress. If this happens, you must unpair the
mobile phone and the vehicle if you wish to
place a call with the mobile phone.

Start-up

Pairing the mobile phone with the

vehicle

The following prerequisites must be met:

Compatible mobile phone: the mobile
phone is supported by the full preparation
package mobile phone. You can obtain
information on the Internet at:
www.bmw.com

The mobile phone is ready to operate.

The Bluetooth link is activated in the vehi-
cle, refer to page

181

, and in the mobile

phone.

Depending on the mobile phone, some
default settings may be necessary for the
mobile phone: e.g. using the following
menu items:

Bluetooth switched on

Connection without confirmation

Reconnection

Depending on the mobile phone type, the
power-saving mode setting, for example,
may result in a paired mobile phone not
being detected by the vehicle.

For pairing purposes, define any number as
the Bluetooth passkey, e.g. 1. This Blue-
tooth passkey is no longer required after
pairing has been successful.

The ignition is switched on.

Pair the mobile phone with the vehicle
only when the car is stationary, to avoid

endangering the car's occupants and other
road users by being distracted.

Switch on ignition

Insert remote control all the way into the
ignition lock.

Switch on ignition without operating the
brake or clutch or pressing the start/stop
button.

Preparation via iDrive

iDrive, for operating principle refer to page

Press the

button to call up the start

menu.

Press the controller to open the menu.

Select "Settings" and press the controller.

Select "Bluetooth" and press the controller.