BMW 2008 135i Coupe Manual Do Proprietário

 217

1.

Pull the wire brackets over the notches, see 
arrow, and fold to the side.

2.

Fold away the headlamp cover.

Be careful when attaching the headlamp 
cover and ensure that both wire brackets 

are securely in place, otherwise leaks could 
occur and cause damage to the headlamp sys-
tem.

<

Attach the headlamp cover in reverse order.

H7 bulb, 55 watts

Always wear gloves and eye protection; 
the atmosphere within the H7 bulb is 

pressurized. Otherwise there is a risk of injury if 
the bulb is damaged.

<

The figure shows the right-hand headlamp.
1 High beams
2 Low-beam headlamps

1.

Remove the headlamp cover.

2.

Fold down the holding bracket.

3.

Remove and replace the bulb.

4.

Reattach the bulb holder with the notch at 
the top.

5.

Fold the holding bracket back up and let it 
snap into place.

6.

Attach the headlamp cover.

5 watt bulb, W5W

1.

Remove the headlamp cover.

The figure shows the right-hand headlamp.

2.

Pull out the bulb holder.

3.

Remove and replace the bulb.

4.

Reinsert the bulb holder.

5.

Attach the headlamp cover.

H8 bulb, 35 watts

The figure shows the right-hand headlamp.

1.

Remove the headlamp cover.

2.

Turn the bulb, see arrow, and remove it.

3.

Pull off the connector and replace the bulb.

Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG