BMW 2008 135i Coupe Manual Do Proprietário

Página de 260
Transporting child
ren safely
56
3.
Allow the belt strap to retract and pull it taut 
against the child-restraint system.
The safety belt is locked.
To unlock the safety belt
1.
Open the belt buckle
2.
Remove the child-restraint system.
3.
Allow the safety belt strap to retract all the 
way.
LATCH child-restraint fixing 
system
LATCH: Lower Anchors and Tethers for CHil-
dren.
To install and use the LATCH child-
restraint system, follow the operating and 
safety instructions provided by the manufac-
turer of the system, otherwise the protective 
function of the seat may be compromised.
<
Before installing the child seat, pull the belt out 
of the area for the child-restraint fixing system.
Ensure that both lower LATCH anchors 
are correctly engaged and that the child-
restraint system is resting firmly against the 
backrest, otherwise the protective function of 
the seat may be compromised.
<
Coupe: rear seats
The anchor points for the lower LATCH 
anchors are located behind the labeled protec-
tive caps.
Convertible: rear seats
The anchor points for the lower LATCH 
anchors are located at the positions indicated 
by arrows, in the gap between the seat and the 
backrest.
Coupe: child-restraint system with 
tether strap
Use the top tether anchors to secure 
child-restraint systems only, otherwise 
the anchors could be damaged.
<
For child-restraint systems with tether straps 
there are two additional anchors, see arrows.
Coupe: placement of the tether strap
Make sure the upper retaining strap does 
not run over sharp edges and is not 
twisted as it passes to the top anchor. Other-
wise the strap will not properly secure the child-
restraint system in the event of an accident.
<
Online Edition for Part no. 01 41 0 014 691 - © 11/07 BMW AG