BMW 2008 135i Coupe Manual Do Proprietário

ryth

ing un

r co

rol

Select a text message and press the con-
troller.

To exit the display:
Select

and press the controller.

Speed limit*

You can enter a speed, and a Check Control
message will indicate when you reach this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.
iDrive, for operating principle refer to page

Open the start menu.

Call up "Navigation".

Select "Car Data" and press the controller.

Select "Limit" and press the controller.

Setting or changing the limit

Select the speed and press the controller.

Turn the controller to set the limit.

Press the controller to apply the setting.

Applying your current speed as limit

Select "Select current speed" and press the
controller. The system adopts your current
speed as the limit.

Activating the limit

Select "On" and press the controller.

Limit is activated.

Stopwatch

iDrive, for operating principle refer to page

Open the start menu.

Call up "Navigation".

Select "Car Data" and press the controller.

Select "Stopwatch" and press the control-
ler.

Starting, stopping or resetting the stop-
watch

Taking an interim time reading

Starting, stopping or resetting

Select "Start" and press the controller.
The stopwatch starts at the displayed time.

Select "Reset" and press the controller.
The stopwatch is reset and restarts if it was
running beforehand.

Select "Stop" and press the controller.
This stops the timer.

Taking an interim time reading

Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.