BMW 2007 Z4 M Roadster Manual Do Proprietário

t a

lanc

riv

g tip

ilit

Replacing components

Onboard tool kit

The onboard tool kit is stored in a tool pouch.

Roadster

The onboard tool kit can be found on the right-
hand side of the cargo bay in a compartment
next to the battery cover.

Coupe: access to onboard tool kit

Turn the quick-release fastener counter-
clockwise.

Pull out the cover.

When reinstalling the cover, make sure
that its tabs are inserted into the corre-

sponding cut-outs in the cargo bay trim panel.

The onboard tool kit can be found on the right-
hand side of the cargo bay on top of the battery.

M Mobility System

Repairing a flat tire

To repair a flat tire, an M Mobility System is pro-
vided in your BMW Z4 M Roadster/Z4 M Coupe.
Using this system you can apply a sealant to the
inside of the tire, seal off the damaged area,
restore the tire inflation pressure and then con-
tinue driving.

Safety measures in the event of a flat:
Park the vehicle as far as possible from

passing traffic and on solid ground. Switch on
the hazard warning flashers.
Lock the steering wheel so that the wheels are
facing straight ahead. Apply the parking brake
and engage first or reverse gear. Have all vehi-
cle occupants get out of the vehicle and ensure
that they remain outside the immediate area in a
safe place, such as behind a guardrail.
If a warning triangle

or portable hazard warning

lamp

is required, set it up on the roadside at an

appropriate distance from the rear of the vehi-
cle. Comply with all national safety guidelines
and regulations.

Preparation

If possible, do not remove foreign bodies which
have penetrated the tire.

ba5.book Seite 31 Mittwoch, 28. Februar 2007 1:09 13