BMW 2007 X5 4.8i SAV Manual Do Proprietário

 43

6.

Select "Central locking" and press the con-
troller.

7.

Select "Last seat pos." and press the con-
troller.

8.

Select "After unlocking" or "After door 
opened".

9.

Press the controller.

Select "Deactivated" and press the controller.

Do not call up a position from the memory 
while the vehicle is moving. There is a risk 

of accident from unexpected movement of the 
seat or steering wheel.

<

1.

Open the driver's door after unlocking or 
switch on radio readiness.

2.

Briefly press the desired memory button

1 

or

2.

The system cancels the adjustment procedure 
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.

1.

Close the driver's door and switch the igni-
tion on or off.

2.

Press the desired memory button

1 or 2 

and maintain pressure until the adjustment 
process has been completed.

If the 

 button was pressed inadvertently: 

press the button again; the LED goes out.

A correctly adjusted head restraint reduces the 
risk of spinal injury in the event of an accident.

Adjust the head restraint so that its center 
is approx. at ear level. Otherwise there is 

increased danger of injury in the event of an 
accident. Only remove the head restraints if the 
respective seat is not occupied. Reinstall the 
head restraints before transporting passen-
gers, as otherwise the head restraint cannot 
provide its protective function.

<

You can adjust the height of the head restraints 
electrically.
Removing:

1.

Tilt the backrest toward the rear.

2.

Move the head restraint up as far as possi-
ble.

3.

Pull out the head restraint completely with a 
firm movement.

Installing:

1.

Push the switch upward for a maximum of 
approx. 10 seconds, however if possible 
only until a change of the humming noise 
indicates that the installed head restraint 
would have been moved all the way to the 
top.

2.

Insert the head restraint and press down on 
both sides until it is heard and felt to 
engage.

Online Edition for Part no. 01 41 0 012 501 - © 08/06 BMW AG