BMW 2007 X5 4.8i SAV Manual Do Proprietário

riv

g ti

uni

iga

lity

Everything under control

Odometer, outside

temperature display, clock

1 Button in instrument cluster
2 Outside temperature display and clock
3 Odometer and trip odometer

Button in instrument cluster

With ignition switched on
Press the button:
Resetting trip odometer
Press the button for approx. 5 seconds:
Displaying service requirements, refer to
page

With ignition switched off
Press the button:
Briefly displaying time, outside temperature
and odometer

Units of measure

To set the corresponding unit of measure km or
miles for the odometer and for the outside tem-
perature

7 or 6, refer to page

The setting is stored for the remote control cur-
rently in use.

Time, date, outside temperature
display

From radio readiness the outside temperature
and the time are displayed.
To set the time, refer to page

Retrieving date

Press the button on turn signal lever upward;
the date appears.
To set the date, refer to page

Pressing the button upward or downward sev-
eral times changes the display between clock
and outside temperature display, date and
Check Control messages, refer to page

Outside temperature warning

If the display drops to +37

7/+36, a signal

sounds and a warning lamp lights up. A mes-
sage appears on the Control Display. There is
an increased danger of ice.

Even at temperatures above +37

6 ice can form. Therefore, drive care-

fully, e.g. on bridges and sections of road in the
shade, otherwise there is an increased accident
risk.

Odometer and trip odometer

Resetting trip odometer:
Press button

1 in the instrument cluster with

the ignition switched on.

When vehicle is parked

To briefly display the time, outside temperature
and mileage after the remote control has been
removed from the ignition lock:
Press button

1 in the instrument cluster.