BMW 2007 750i Sedan Manual Do Proprietário
Ge
tt
ing
st
arte
d
182
2.
Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
3.
Push the mobile phone downward toward
the electrical connections, arrow
the electrical connections, arrow
1, and
press forward, arrow
2, until it engages.
The battery is charged starting from radio ready
state of the vehicle, refer to charge indicator on
mobile phone.
state of the vehicle, refer to charge indicator on
mobile phone.
Removing mobile phone
To remove mobile phone, depending on model:
>
Press the button.
>
Push the button upward.
Pairing mobile phone with
vehicle
To pair your mobile phone with the vehicle, you
need a special Bluetooth passkey. This is
included in the information kit.
The following prerequisites must be met:
need a special Bluetooth passkey. This is
included in the information kit.
The following prerequisites must be met:
>
The ignition is switched on.
>
The mobile phone is ready for operation.
>
The Bluetooth connections in the vehicle
and the mobile phone are activated.
and the mobile phone are activated.
>
Depending on the mobile phone model,
certain presets are required on the mobile
phone, e.g. detecting, connecting or pairing
Bluetooth unit, refer to the operating
instructions of your mobile phone.
certain presets are required on the mobile
phone, e.g. detecting, connecting or pairing
Bluetooth unit, refer to the operating
instructions of your mobile phone.
Only pair the mobile phone with the vehi-
cle stopped; otherwise, the passengers
cle stopped; otherwise, the passengers
and other road user can be endangered due to a
lack of attentiveness on the part of the driver.
lack of attentiveness on the part of the driver.
<
Preparation via iDrive
.
1.
Press the
button to open the start
menu.
2.
Move the controller toward "Settings".
3.
Select "Phone" and press the controller.
4.
Select "PAIRING" and press the controller.
The three LEDs in the status line flash, refer
to page
The three LEDs in the status line flash, refer
to page
The mobile phone can also be paired
with the vehicle via "Communica-
with the vehicle via "Communica-
tion". When pairing, follow the instructions
that appear in the Control Display.
that appear in the Control Display.
<
Establishing connection between
mobile phone and vehicle
mobile phone and vehicle
5.
Additional operations must be carried out
on the mobile phone and differ depending
on the model, refer to the operating instruc-
tions of your mobile phone, e.g. under
searching for, connecting to, or linking to a
Bluetooth device.
on the mobile phone and differ depending
on the model, refer to the operating instruc-
tions of your mobile phone, e.g. under
searching for, connecting to, or linking to a
Bluetooth device.
6.
Enter and confirm Bluetooth passkey using
your mobile phone keypad.
Following successful logon, the name of
your mobile phone keypad.
Following successful logon, the name of
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG