BMW 2007 750i Sedan Manual Do Proprietário
Giving and
receiv
ing
as
sistance
220
Select "BMW Assist" if you have applied for this
information service, refer to Roadside Assis-
tance on page
information service, refer to Roadside Assis-
tance on page
.
Warning triangle*
The warning triangle is conveniently stored in
the onboard tool kit mounted on the inside of
the luggage compartment lid.
the onboard tool kit mounted on the inside of
the luggage compartment lid.
First-aid kit*
The first-aid kit is also located in the container
of the onboard tool kit.
Some of the articles contained in the first-aid kit
have a limited service life. Check the expiration
dates of the contents regularly and replace the
contents concerned in a timely fashion as
needed.
of the onboard tool kit.
Some of the articles contained in the first-aid kit
have a limited service life. Check the expiration
dates of the contents regularly and replace the
contents concerned in a timely fashion as
needed.
Jump starting
When your battery is discharged, you can use
two jumper cables to start your vehicle with
power from the battery in a second vehicle. You
can also use the same method to help start
another vehicle. Use only jumper cables with
fully-insulated terminal clamps.
two jumper cables to start your vehicle with
power from the battery in a second vehicle. You
can also use the same method to help start
another vehicle. Use only jumper cables with
fully-insulated terminal clamps.
To avoid the risk of potentially fatal injury,
always avoid all contact with electrical
always avoid all contact with electrical
components while the engine is running. Care-
fully adhere to the following sequence, both to
prevent damage to one or both vehicles, and to
guard against possible personal injury.
fully adhere to the following sequence, both to
prevent damage to one or both vehicles, and to
guard against possible personal injury.
<
Preparing
1.
Check whether the battery of the other
vehicle has a voltage of 12 Volts and
approximately the same capacitance in Ah.
This information is listed on the battery.
vehicle has a voltage of 12 Volts and
approximately the same capacitance in Ah.
This information is listed on the battery.
2.
Switch off the engine of the assisting vehi-
cle.
cle.
3.
Switch off any electrical systems and com-
ponents in both vehicles.
ponents in both vehicles.
Make sure that there is no contact
between the bodywork of the two vehi-
between the bodywork of the two vehi-
cles; otherwise, there is a danger of short cir-
cuits.
cuits.
<
Connecting jumper cables
To avoid personal injury from sparks, fol-
low this sequence when connecting jum-
low this sequence when connecting jum-
per cables.
<
In your BMW, the so-called jump starting termi-
nal in the engine compartment functions as the
positive battery terminal. The symbol + is
embossed on the cover.
nal in the engine compartment functions as the
positive battery terminal. The symbol + is
embossed on the cover.
1.
Remove the cover of the BMW jump start-
ing terminal, refer to arrow
ing terminal, refer to arrow
1.
2.
Attach one terminal clamp of the plus/+
jumper cable to the positive terminal of the
battery or a jump starting terminal of the
vehicle providing assistance.
jumper cable to the positive terminal of the
battery or a jump starting terminal of the
vehicle providing assistance.
3.
Attach the second positive/+ clamp of the
jumper cable to the positive battery terminal
or to a jump starting terminal on the vehicle
to be started.
jumper cable to the positive battery terminal
or to a jump starting terminal on the vehicle
to be started.
4.
Attach one negative/– clamp of the jumper
cable to the negative battery terminal or to
an engine or body ground of the assisting
vehicle.
cable to the negative battery terminal or to
an engine or body ground of the assisting
vehicle.
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG