BMW 2007 750i Sedan Manual Do Proprietário
Adju
sting
46
Seat, mirror and steering
wheel memory
You can store and select two different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
With comfort seats, you can also use the mem-
ory to store and recall two seat positions for
each additional seat.
The adjustment of the lumbar support is not
stored in the memory.
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
With comfort seats, you can also use the mem-
ory to store and recall two seat positions for
each additional seat.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Switch on radio ready state or ignition, refer
to page
to page
2.
Set desired seat position; for driver's seat
also set the exterior mirror and steering
wheel position.
also set the exterior mirror and steering
wheel position.
3.
Press
M
EMORY button:
The LED in the button lights up.
4.
Press the desired memory button
1 or 2:
The LED goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering wheel.
the seat or steering wheel.
<
Comfort mode
1.
With driver's door open after unlocking or
with radio ready state switched on.
with radio ready state switched on.
2.
Briefly press the desired memory button
1
or
2.
The adjusting procedure is immediately inter-
rupted when you touch a seat adjustment
switch or one of the memory buttons.
rupted when you touch a seat adjustment
switch or one of the memory buttons.
Safety mode
1.
With driver's door closed and ignition
switched either on or off.
switched either on or off.
2.
Press the desired memory button
1 or 2
and maintain pressure until the adjustment
process has been completed.
process has been completed.
If you press the
M
EMORY button accidentally:
Press the button again; the LED goes out.
Head restraints
A correctly adjusted head restraint reduces the
risk of injury to cervical vertebrae in the event of
an accident.
risk of injury to cervical vertebrae in the event of
an accident.
Adjust the head restraint so that its center
is approx. at ear level. Otherwise, there is
is approx. at ear level. Otherwise, there is
increased danger of injury in the event of an
accident. Only remove the head restraint if no
one will be sitting on the seat in question. Rein-
stall the head restraint before transporting any-
one in the seat. Otherwise, the protective func-
tion of the head restraint is unavailable.
accident. Only remove the head restraint if no
one will be sitting on the seat in question. Rein-
stall the head restraint before transporting any-
one in the seat. Otherwise, the protective func-
tion of the head restraint is unavailable.
<
Front: height adjustment
1.
Select head restraint, button
1.
2.
Adjust height, arrow
2.
Removing
1.
Raise head restraint all the way.
2.
Pull out the head restraint all the way out
with a firm tug.
with a firm tug.
Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG