BMW 2007 750i Sedan Manual Do Proprietário

 55

1.

Open the belt buckle.

2.

Remove the child restraint system.

3.

Allow the belt webbing to be pulled in com-
pletely.

LATCH: Lower Anchor and Tethers for CHil-
dren.

For installation and use of LATCH child 
restraint systems, follow the operating 

and safety instructions of the system manufac-
turer.

<

If the vehicle is equipped with power seats in 
the rear, return these to their standard positions 
before using LATCH child restraint systems, 
refer to page

Before installing the LATCH child's seat, pull 
the belt away from the region of the child 
restraint fixing system.

Make sure that the LATCH anchors have 
properly engaged and that the child 

restraint system is resting snugly against the 
backrest.

<

The anchor points for the LATCH anchors are 
provided at the locations indicated by the 
arrows, in the gap between the bottom seat 
cushion and backrest.

The installation guide makes it easier to install 
the LATCH child restraint systems and at the 
same time protects the surface of the seats.

The installation guide is available at your 
BMW center. Always follow all instruc-

tions for operation and use provided by the 
manufacturer in the installation guide.

<

Firmly press the installation guide into the gap 
between the upholstery on seat cushion and 
backrest, continuing until the two funnel-
shaped guides snap into place in the LATCH 
child restraint fixing system in the seat.

Pull the installation guide to remove.

The attachment points for the top tethers 
are only intended for attachment of child 

restraint systems; other uses can damage the 
attachment points.

<

There are three additional attachment points for 
child restraint systems with a tether strap, refer 
to arrows.

Online Edition for Part no. 01 41 0 013 316 - © 02/07 BMW AG