BMW 2007 525xi Sedan Manual Do Proprietário

 93

Manual transmission:
Use HDC in low gears and reverse gear.
Automatic transmission:
You can use HDC in every drive position.

1 Display for target speed
2 HDC display

The warning lamp for the brake system 
lights up, together with the indicator 
and warning lamps for ABS, DSC and 
Tire Pressure Control or Flat Tire Mon-
itor. A message appears on the Control 
Display. The driving-stability control 
systems have failed. Conventional 
braking efficiency remains available 
without limitations. While you may con-
tinue, you should remember to proceed 

cautiously and drive defensively while avoiding 
full brake applications. In addition, the Tire 
Pressure Control or the Flat Tire Monitor has 
also failed. Have the system checked as soon as 
possible.

Display of the previously described 
malfunction in Canadian models.

The DSC indicator lamp lights up. A 
message appears on the Control Dis-
play. A malfunction has occurred in the 

DSC and DTC. The stabilizing actions are no 
longer available. The vehicle remains opera-
tional. Have the system checked as soon as 
possible.

The brake system warning lamp lights 
up yellow. A message appears on the 
Control Display. The brake assistant is 

defective. Have the system checked as soon as 
possible.

Display of the previously described 
malfunction in Canadian models.

Dynamic Drive minimizes body roll and opti-
mizes vehicle stability during cornering and 
evasive maneuvers.
Dynamic Drive is based on active stabilizers on 
the front and rear axles. Suspension compli-
ance adapts to suit driving conditions, varying 
from performance-oriented during cornering to 
smooth and comfort-oriented when the vehicle 
is proceeding in a straight line. During vehicle 
operation, the system continuously runs 
through closed-loop control cycles lasting only 
fractions of a second.
The system assumes operational status each 
time you start the engine.

The warning lamp for self-leveling sus-
pension lights up yellow and a message 
is shown on the Control Display. A mal-

function has occurred in the self-leveling sus-
pension. Stop and check the vehicle. If it is con-
siderably lower at the rear than at the front, and 
possibly also on one side – rear left compared to 

Online Edition for Part no. 01 41 0 013 308 02/07 BMW AG