BMW 2006 M5 Sedan Manual Do Proprietário

riv

g ti

uni

iga

lity

Select a text message and press the con-
troller.

To exit the display:

Select the arrow and press the controller.

Indication of malfunction urgency

Depending on your vehicle's equipment, the
stored Check Control messages are also dis-
played with the following symbols:

No malfunctions are present in the moni-
tored systems.
Malfunctions are present in the moni-
tored systems. Depending on the mal-
function, supplementary information is
shown on the Control Display.

The symbols also indicate the status of the ser-
vice requirements display, refer to page

Displays after completion of trip

Malfunction reports generated during the trip
are shown consecutively when you switch off
the ignition.
Before the display disappears, you can display
the messages once again. Press the CHECK
button for approx. 2 seconds. If several mes-
sages are present, you can continue to press
the CHECK button to view them in succession.
The display goes out

automatically after a brief period

when you press the CHECK button again
for approximately 2 seconds

Speed limit

You can enter a speed and a Check Control
message indicates when you have reached this
speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle speed falls below it
again by at least 3 mph/5 km/h.

Displaying, setting or changing limit

iDrive, for explanation of principle, refer to
page

Open the start menu.

Open "Navigation".
Without navigation system

Open "Car Data".

Select "Car Data" and press the controller.

Select "Limit" and press the controller.