BMW 2007 328i Convertible Manual Do Proprietário

Página de 272
 89
until "PDC" is selected and press the con-
troller.
6.
Select "PDC display on" and press the con-
troller.
 The PDC screen is activated.
The display is shown on the Control Display as 
soon as PDC is activated.
System limitations
Even with PDC, final responsibility for 
estimating the distance between the 
vehicle and any obstructions always remains 
with the driver. Even when sensors are pro-
vided, there is a blind spot in which objects can 
no longer be detected. The system is also sub-
ject to the physical limits that apply to all forms 
of ultrasonic measurement, such as those 
encountered with trailer towbars and hitches, 
thin or wedge-shaped objects, etc. Low objects 
that have already been displayed, e.g. curbs, 
can disappear again from the detection area of 
the sensors before or after a continuous tone 
sounds. Higher, protruding objects, e.g. ledges, 
cannot be detected. Loud sound sources out-
side or inside the car can drown out the PDC 
signal.
<
Driving stability control 
systems
Your BMW has a number of systems that help 
to maintain the vehicle's stability even in 
adverse driving conditions.
ABS Antilock Brake System
ABS prevents locking of the wheels during 
braking. Safe steering response is maintained 
even during full braking. Active safety is thus 
increased.
The ABS is operational every time you start the 
engine. Braking safely, refer to page
.
EBV Electronic brake-force 
distribution
The system controls the brake pressure in the 
rear wheels to ensure stable braking behavior.
DBC Dynamic Brake Control
When you apply the brakes rapidly, this system 
automatically produces the maximum braking 
force boost and thus helps to achieve the short-
est possible braking distance during full brak-
ing. This system exploits all of the benefits pro-
vided by ABS.
Do not reduce the pressure on the brake for the 
duration of the full braking application.
DSC Dynamic Stability Control
DSC prevents the driving wheels from losing 
traction when you pull away from rest or accel-
erate. DSC also recognizes unstable driving 
conditions, for example if the rear of the car is 
about to swerve or if momentum is acting at an 
angle past the front wheels. In these cases, 
DSC helps the vehicle maintain a safe course 
within physical limits by reducing engine output 
and through braking actions at the individual 
wheels.
The laws of physics cannot be repealed, 
even with DSC. An appropriate driving 
style always remains the responsibility of the 
driver. Therefore, do not reduce the additional 
safety margin again by taking risks, as this could 
result in an accident.
<
Online Edition for Part no. 01 41 0 013 670 - © 02/07 BMW AG