BMW 2006 760Li Sedan Manual Do Proprietário

46

It will be necessary to return the rear seats 
to their standard position before using a 

child restraint system, for instance, refer to 
page

.

<

You can store and select two different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
With comfort seats, you can also use the mem-
ory to store and recall two seat positions for 
each additional seat.
The adjustment of the lumbar support is not 
stored in the memory.
The setting is stored for the remote control cur-
rently in use.

1.

Switch on radio ready state or ignition, refer 
to page

2.

Set desired seat position; for driver's seat 
also set the exterior mirror and steering 
wheel position.

3.

Press 

M

EMORY button: 

The LED in the button lights up.

4.

Press the desired memory button

1 or 2: 

The LED goes out.

Do not request a position from the mem-
ory while the vehicle is moving. There is a 

risk of accident from unexpected movement of 
the seat or steering wheel.

<

1.

With driver's door open after unlocking or 
with radio ready state switched on.

2.

Briefly press the desired memory button 

1 

or

2.

The system immediately cancels the adjust-
ment procedure when you briefly press one of 
the seat adjustment buttons or one of the mem-
ory buttons.

1.

With driver's door closed and ignition 
switched either on or off.

2.

Press the desired memory button 

1 or 2 

and maintain pressure until the adjustment 
process has been completed.

If you press the 

M

EMORY button accidentally: 

Press the button again; the LED goes out.

A correctly adjusted head restraint reduces the 
risk of injury to cervical vertebrae in the event of 
an accident.

Adjust the head restraint so that its center 
is approx. at ear level. Otherwise, there is 

increased danger of injury in the event of an 
accident.

<

1.

Select head restraint, button

1.

2.

Adjust height, arrow

2.

Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG