BMW 2006 760Li Sedan Manual Do Proprietário
E
ve
ryth
ing un
de
r co
nt
rol
82
Press the CHECK button for approx. 8 seconds,
refer to page
refer to page
. The stored status reports
appear again in the display. If several messages
are present, you can continue to briefly press
the CHECK button to view them in succession.
The Check Control function is terminated:
are present, you can continue to briefly press
the CHECK button to view them in succession.
The Check Control function is terminated:
>
automatically after a brief period
>
if you press the CHECK button again for
approx. 8 seconds.
approx. 8 seconds.
Trip computer
The trip computer can be used, e.g. for a vaca-
tion trip.
iDrive, for principle details, refer to page
tion trip.
iDrive, for principle details, refer to page
.
1.
Press the
button to open the start
menu.
2.
Move the controller toward "Car Data".
3.
Select "BC
" and press the controller.
>
Departure time
>
Driving time
>
Distance traveled
>
Average fuel consumption
>
Average speed
To switch trip computer on/off and reset all val-
ues:
Select "START / RESET" and press the con-
troller.
To deactivate trip computer:
Select "STOP" and press the controller.
ues:
Select "START / RESET" and press the con-
troller.
To deactivate trip computer:
Select "STOP" and press the controller.
Speed limit
You can enter a speed and a Check Control
message will indicate when you have reached
this speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your speed has dropped to at
least 3 mph/5 km/h slower than this speed limit
since the last warning.
message will indicate when you have reached
this speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your speed has dropped to at
least 3 mph/5 km/h slower than this speed limit
since the last warning.
Displaying, adjusting, or changing limit
.
1.
Press the
button to open the start
menu.
2.
Move the controller toward "Car Data".
3.
Select "Limit" and press the controller.
4.
Select "SET" and press the controller.
5.
Turn the controller to adjust the limit.
6.
Press the controller to save the setting.
Applying your current speed as limit
Select
and press the controller.
The system applies your current speed as the
limit.
limit.
Activating/deactivating limit
Select "ON / OFF" and press the controller.
When the speed limit is switched on, "ON /
OFF" is highlighted.
When the speed limit is switched on, "ON /
OFF" is highlighted.
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG