BMW 2006 X3 3.0i SAV Manual Do Proprietário

Página de 133
Replacing components
102
2.
Apply gentle pressure to the bulb while 
turning it to the left and pull it out.
3.
Install in the reverse order.
Front fog lamps
H11 bulb, 55 watts
Always wear gloves and eye protection – 
the atmosphere within the bulb is pres-
surized. Failure to observe this precaution can 
lead to personal injury should the bulb be dam-
aged.
<
1.
Pull the cover in front of the fog lamp for-
ward.
2.
Loosen the screws, refer to arrow, and pull 
out the headlamp.
3.
Turn the lamp base at the back of the head-
lamp to the left and remove it.
4.
Replace the bulb.
Tail lamps
21 watt bulb
Turn signal
Backup lamp
Tail lamp/brake lamp
Tail lamp/brake lamp
*
Replacing tail lamps
1.
Open the flap in the side panel, refer to 
page
.
2.
To release the plug connection of the cable, 
press the spring, refer to arrow
1.
3.
Lift the side panel somewhat.
4.
To remove the back panel of the lamp, 
release the retainer, refer to arrow
2.
5.
Apply gentle pressure to the bulb fitting 
while turning it to the left for removal and 
replacement.
6.
Install in the reverse order.
Lamps in the liftgate
In case of a malfunction, please contact your 
BMW Sports Activity Vehicle Center.
License plate lamps
10 watt bulb
1.
Press the lamp out to the side with a screw-
driver.
2.
Remove the lamp and replace the bulb.
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG