BMW 2006 X3 3.0i SAV Manual Do Proprietário
Practical interi
or
acc
ess
orie
s
72
Partition net*
Do not allow the partition net to snap back
into place; otherwise, there is a danger of
into place; otherwise, there is a danger of
injury and the partition net could be damaged.
<
Hooking partition net into place
Pull the partition net out of the case by the
strap. Press the ends of the bar toward each
other, refer to arrows
strap. Press the ends of the bar toward each
other, refer to arrows
1, and insert into the
brackets. Then press the bar all the way upward
in the middle, refer to arrow
in the middle, refer to arrow
2, so that it engages
in the brackets.
Lowering partition net
Grasp bar on one side on the partition net, press
upward and push the ends of the bar together,
then release from the brackets.
upward and push the ends of the bar together,
then release from the brackets.
Behind side trim panel
Press the button to open.
Floor cover
Opening
For access to the jack etc.
To open, raise the cover by the handle, refer to
arrow.
If needed, you can remove or raise the floor
cover.
To open, raise the cover by the handle, refer to
arrow.
If needed, you can remove or raise the floor
cover.
Raising
Swing up the floor cover and hook it onto the
handle of the cargo area cover by its catch.
handle of the cargo area cover by its catch.
Online Edition for Part No. 01 41 0 012 213 - © 02/06 BMW AG