BMW 2006 M3 Coupe Manual Do Proprietário

Página de 170
 
20
Dynamic Stability Control 
(DSC)
 
 
The indicator lamp flashes and 
an acoustic signal sounds: the system 
is active and governs drive and braking 
force.
If the indicator lamp fails to go out after 
the engine has been started, or if it 
comes on during normal driving and 
stays on:
DSC has been deactivated, either at the 
button or in response to a system mal-
function.
If there is a malfunction, have the sys-
tem checked as soon as possible.
For additional information, refer to 
page 
Dynamic Brake Control (DBC)
 
 
Malfunction in DBC system. 
Conventional braking efficiency 
is available and unrestricted.
Have the system checked as soon as 
possible.
For additional information, refer to 
page 
.
Dynamic Brake Control (DBC) 
warning lamp for Canadian 
models.
 
Add washer fluid
The washer fluid level is too low, 
top it up at the earliest opportu-
nity.
For additional information, refer to 
page 
SERVICE ENGINE SOON
 
 
If the indicator lamp comes on 
either continuously or intermit-
tently, this indicates a fault in the emis-
sions-related electronic systems. 
Although the vehicle remains opera-
tional, you should have the systems 
checked by your BMW center at the 
earliest possible opportunity.
For additional information, refer to 
page 
Service Engine Soon indicator 
lamp for Canadian models.
Engine electronics
 
 
There is a fault in the electronic 
engine-management system. 
You can continue to drive with reduced 
engine output or engine speed. Please 
have the system inspected at your 
BMW center.
 
Add coolant
Coolant level too low, top up as 
soon as possible.
For additional information, refer to 
page 
CHECK GAS CAP*
 
 
This indicator lamp comes on 
when the gas cap is loose or 
missing.
Close the gas cap tightly: refer to 
page 
.
 
Yellow: for your information
 
M Track mode
Lights up when M Track mode is 
activated.
For additional information, refer to 
page 
.
 
Green: for your information
 
Turn signal indicator
Flashes when turn signals are 
on. Rapid flashing: indicates a 
system malfunction.
For additional information, refer to 
page 
.
 
Indicator and warning lamps
Online Edition for Part-No. 01 41 0 158 512 - © 09/04 BMW AG