BMW 2006 650i Coupe Manual Do Proprietário

Página de 236
 39
Together
1.
Briefly press button
1:
The LEDs in the button
1 and the switch 2 
light up for approx. 10 seconds.
2.
Press switch 
2:
>
Down to the resistance point:
All windows, including the rear window, 
continue to open as long as you press 
the switch.
You can close the windows in the same 
manner by pulling the switch.
>
Press the switch beyond the resistance 
point:
All windows open automatically. Press-
ing the switch again stops the opening 
movement.
Briefly press button 
1 again to deactivate the 
function. The LEDs go out.
Rear window
1.
Briefly press button
1:
The LEDs in the button
1 and the switch 2 
light up for approx. 10 seconds.
2.
Press switch 
2:
>
Down to the resistance point:
The rear window continues to open for 
as long as you hold down the switch.
You can close the rear window in the 
same manner by pulling the switch.
>
Press the switch beyond the resistance 
point:
The rear window opens automatically. 
Pressing the switch again stops the 
opening movement.
Briefly press button 
1 again to deactivate the 
function. The LEDs go out.
The rear window opens and closes auto-
matically when you open or close the con-
vertible top.
<
After switching off ignition
You can still operate the windows with the 
remote control removed or the ignition 
switched off for approx. 1 minute, but in the 
Convertible, this is only true as long as no door 
has been opened.
For information on using the convenience oper-
ation mode at the door lock or with the remote 
control, refer to page
For information on comfort closing with comfort 
access, refer to Locking doors on page
.
Anti-trapping mechanism
If the closing force rises beyond a predefined 
threshold during closing, the system will imme-
diately stop moving the window prior to lower-
ing it slightly.
Convertible: the rear side windows and 
rear window are not equipped with an 
anti-trapping mechanism.
<
Despite the anti-trapping mechanism, 
you should inspect the travel path of the 
front side window prior to closing it, as the 
safety feature could fail to detect certain kinds 
of obstructions, such as very thin objects, and 
the window would continue closing.
Pulling the switch beyond the resistance point 
and holding it limits the response of the anti-
trapping mechanism. In this case, the window 
will respond to forces beyond a defined thresh-
old by opening only slightly.
If you pull the switch past the resistance point 
again within approx. 4 seconds and hold it there, 
  Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG