BMW 2006 650i Coupe Manual Do Proprietário

ahead and to well-lit areas such as towns and
cities.

Manually switching between high and
low beams

You can intervene at any time if you wish or the
situation requires.

If the high-beam assistant has switched on
the high beams, but you want to use the low
beams, simply switch to the low beams with
the turn signal lever. This also deactivates
the high-beam assistant.
To reactivate the system, briefly press the
turn signal lever in the high beam direction
again.

If the high-beam assistant has switched on
the low beams, but you want to use the high
beams, switch to the high beams in the
accustomed manner. The system is deacti-
vated in the process and you must switch to
the low beams manually.
To reactivate the system, briefly press the
turn signal lever in the high beam direction
again.

You use the headlamp flasher in the usual
way when the low beams are on.

System limits

The high-beam assistant cannot replace
personal decisions about the benefits of

using high beams. In situations that require
them, you should switch to the low beams man-
ually to avoid a safety risk.

In the following sample situations, the system
either does not function or functions only in a
limited way and a personal reaction may be
required:

Under extremely unfavorable weather con-
ditions, such as heavy fog or precipitation

To make out poorly-lit road users such as
pedestrians, cyclists, people on horseback,
horse-drawn vehicles, train or ship traffic
close to the road and wild animals crossing
the road

In tight curves, on steep hilltops or in
depressions, with cross traffic or partially
concealed oncoming traffic on the freeway

In poorly lit places and with highly reflective
signs

In the low speed range

When the windshield is fogged up, dirty or
covered with stickers, decals, etc. in the
area of the interior rearview mirror

When the sensor is dirty. Clean the sensor
on the front side of the interior rearview mir-
ror with a cloth moistened with a small
amount of glass cleaner.

Front fog lamps

The parking lamps or low beams must
be switched on for the fog lamps to
operate. The green indicator lamp in

the instrument cluster lights up when the fog
lamps are switched on.
The fog lamps are switched off whenever the
high beams are switched on.

If the automatic headlamp control is acti-
vated, the low beams will come on auto-

matically when you switch on the fog lamps.