BMW 2006 X5 3.0i SAV Manual Do Proprietário

Handbrake

Manual transmission

The handbrake is primarily intended to
prevent the vehicle from rolling while
parked; it brakes the rear wheels.

Engaging

The lever engages automatically when
you pull it up and the indicator lamp
comes on in the instrument cluster in
ignition key position 2, refer to
pages 19,

Releasing

Pull up slightly on the lever, press the
button and lower the lever.

If exceptional circumstances
should make it necessary to

engage the handbrake while the vehicle
is in motion, do not pull it too strongly.
In doing so, continuously press the but-
ton of the handbrake lever. Otherwise
strong application of the handbrake can
lead to overbraking of the rear axle and
associated 'fishtailing' of the vehicle
rear end.
Manual transmission:
Always engage the handbrake when
parking on slopes and inclined sur-
faces. Even placing the gearshift lever
in 1st gear or reverse may not provide
adequate resistance to rolling.
Automatic transmission:
Place the selector lever in Park.

To prevent corrosion and one-
sided braking action, occasionally

apply the handbrake lightly when the
vehicle is slowly coming to a stop if the
traffic conditions are suitable.
The brake lamps do not light up when
the handbrake is applied.

Press the clutch all the way down each
time you shift, pressing the gearshift
lever into its proper end position.

Depress the clutch when starting the
vehicle, too. If the clutch is not
depressed, the interlock will prevent the
engine from starting.

While shifting in the 5th/6th gear
slot, press the gearshift lever

toward the right, otherwise, accidental
shifting into the 3rd or 4th gear could
result in engine damage.