BMW 2006 650i Convertible Manual Do Proprietário
81
Displays after completion of trip
Malfunction reports generated during the trip
are shown consecutively when you switch off
the ignition.
Before the display disappears, you can display
the messages once again. Press the CHECK
button for approx. 2 seconds. If several mes-
sages are present, you can press the CHECK
button repeatedly.
The display:
are shown consecutively when you switch off
the ignition.
Before the display disappears, you can display
the messages once again. Press the CHECK
button for approx. 2 seconds. If several mes-
sages are present, you can press the CHECK
button repeatedly.
The display:
>
turns off automatically after a brief period
>
can be turned off at any time by pressing
the CHECK button again for approx. 2 sec-
onds
the CHECK button again for approx. 2 sec-
onds
Speed limit
You can enter a speed and a Check Control
message indicates when you have reached
this speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle has fallen at least
3 mph/5 km/h below it in the meantime.
message indicates when you have reached
this speed. This enables you, for example, to
receive warnings if you exceed a speed limit in
an urban area.
You are only warned of reaching this speed a
second time if your vehicle has fallen at least
3 mph/5 km/h below it in the meantime.
Displaying, setting or changing limit
iDrive, for principle details, refer to page
.
1.
Open start menu.
2.
Open "Navigation".
In vehicles without navigation system
In vehicles without navigation system
*
:
Open "Car Data".
3.
Select "Car Data" and press the controller.
4.
Select "Limit" and press the controller.
5.
Select the speed value and press the con-
troller.
troller.
6.
Turn the controller to set the limit. If neces-
sary, hold it against a slight resistance to
enter a greater difference.
sary, hold it against a slight resistance to
enter a greater difference.
7.
Press the controller to apply the setting.
The limit is automatically switched on.
The limit is automatically switched on.
Applying your current speed as limit
Select "Select current speed" and press the
controller. The system applies your current
speed as the limit.
controller. The system applies your current
speed as the limit.
Activating limit
Select "On" and press the controller.
The limit is automatically switched on.
Stopwatch
iDrive, for principle details, refer to page
1.
Open start menu.
2.
Open "Navigation".
In vehicles without navigation system
In vehicles without navigation system
*
:
Open "Car Data".
3.
Select "Car Data" and press the controller.
4.
Select "Stopwatch" and press the control-
ler.
ler.
Starting, stopping, or resetting
>
Select "Start" and press the controller.
The stopwatch starts at the displayed time.
The stopwatch starts at the displayed time.
>
Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.
The stopwatch is reset and it restarts if it
was running beforehand.
>
Select "Stop" and press the controller.
This stops the timer.
This stops the timer.
Online Edition for Part-No. 01 41 0 159 709 © 09/05 BMW AG