BMW 2006 325xi Sports Wagon Manual Do Proprietário

46

gear selected appears briefly in the instrument 
cluster, followed by the gear actually in use.
To use the automatic function again, move the 
selector lever to the right into position D.

Should the selector lever refuse to move out of 
position P although the button on the selector 
lever is pressed, the selector lever lock can be 
overridden:

1.

Unclip the sleeve of the selector lever.

2.

Pull the sleeve up over the selector lever 
until the sleeve is inside out.

3.

Using the screwdriver from the onboard 
tool kit, refer to page

, press the red 

lever while moving the selector lever to the 
desired position.

1 High beams
2 Headlamp flasher
3 Turn signals

Press the lever beyond the resistance point.
To turn off manually, press the lever to the 
resistance point.

Unusually rapid flashing of the indicator 
lamp indicates that a turn signal indicator 

has failed. 
After switching off the ignition, make sure that 
the roadside parking lamps are not switched 
on.

<

Press the lever as far as the resistance point for 
as long as you wish to indicate a turn.

Press the lever as far as the resistance point.
The turn signals flash three times.
You can activate or deactivate this function.
Operating principle, refer to page

.

1.

Lightly push button

1 in the turn indicator 

stalk up or down repeatedly until the symbol 
appears in the display accompanied by the 
word "SET".

2.

Press button 

2.

Online Edition for Part-No. 01 41 0 012 353 - © 03/06 BMW AG