BMW 2005 Z4 Roadster 2.5i Manual Do Proprietário

Página de 120
Driving
38
To release
Pull up slightly on the lever, press the button 
and lower the lever.
If, in exceptional circumstances, it should 
be necessary to engage the parking brake 
while the vehicle is in motion, do not pull it with 
excessive pressure. Keep the release button on 
the parking brake lever pressed down while 
pulling up the lever.
Excessive pressure can lead to overbraking and 
loss of traction, fishtailing, at the rear axle.
The brake lamps do not come on when the 
parking brake is engaged.
<
To avoid corrosion and one-sided brak-
ing, apply the parking brake lightly from 
time to time when coasting to a standstill at a 
traffic signal, for example, provided that it is safe 
to do so.
<
Manual transmission 
6-gear transmission*
When shifting into 5th or 6th gear, press 
the gearshift lever to the right. Otherwise, 
the engine could be damaged by accidentally 
engaging 3rd or 4th gear.
<
Reverse
Select only when the vehicle is stationary. Press 
the gearshift lever to the left to overcome the 
resistance.
As you do this, the backup lamps will come on 
automatically when the ignition key is in 
position 2.
Automatic transmission with 
Steptronic*
In addition to operating the Steptronic as a fully 
automatic transmission, you can also shift 
gears manually with it, refer to page
Selector lever positions
P R N D M/S + —
Available indicators 
P R N D SD M1 to M5
The selector lever position is displayed; in the 
manual mode, the gear currently engaged is 
shown.
Range selection
>
The selector lever can be moved out of 
position P when the ignition is switched on 
or the engine is running: interlock
>
While the vehicle is stationary and before 
shifting out of P or N, depress the footbrake 
in order to disengage the selector lever's 
lock mechanism: shiftlock.
Hold the footbrake down until starting off. 
The vehicle will otherwise start to move 
when a drive position is engaged.
Online Edition for Part-No. 01 41 0 158 704 - © 10/04 BMW AG