BMW 2005 X3 2.5i SAV Manual Do Proprietário

Página de 126
Giving and
 receiv
ing 
as
sistance
104
First-aid kit*
 
Beneath the front passenger's seat. 
To open: pull the handle and fold the cover 
downward. 
To close: fold the cover up. 
Some of the articles in the first-aid kit may 
be used within a limited time only. There-
fore, check the expiration dates of the contents 
regularly and replace the contents in a timely 
fashion as needed. You can find replacements 
in any pharmacy. Always observe all legal regu-
lations requiring a first-aid kit to be carried in the 
vehicle.
<
 
Jump starting 
When your battery is discharged, you can use 
two jumper cables to start your vehicle with 
power from the battery in a second vehicle. You 
can also use the same method to help start 
another vehicle. Use only jumper cables with 
fully-insulated clamp handles. 
To avoid the risk of potentially fatal injury, 
always avoid all contact with electrical 
components while the engine is running. Care-
fully observe the following instructions to avoid 
personal injury and/or damage to one or both 
vehicles.
<
Preparing
1.
Check whether the battery of the other 
vehicle has a voltage of 12 Volts and 
approximately the same capacitance in Ah. 
This information can be found on the bat-
tery.
2.
Switch off the engine of the vehicle provid-
ing assistance.
3.
Switch off any electrical systems and com-
ponents in both vehicles.
Ensure that no contact exists between 
the bodywork on the two vehicles, other-
wise there is a danger of short circuits.
<
 
Connecting jumper cables
To avoid personal injury from sparks, 
always follow this sequence when con-
necting jumper cables.
<
 
On your BMW, the auxiliary terminal for jump 
starting in the engine compartment serves as 
the battery positive terminal, refer also to 
engine compartment overview on page
The symbol + is embossed on the cover.
1.
Open the cover of the BMW auxiliary termi-
nal for jump starting, refer to arrow
1.
2.
Connect one terminal clamp of the posi-
tive/+ jumper cable to the positive terminal 
of the battery or an auxiliary terminal of the 
vehicle providing starting assistance.
3.
Connect the second terminal clamp of the 
positive/+ jumper cable to the positive ter-
minal of the battery or to an auxiliary termi-
nal of the vehicle to be started. 
Your BMW has a special nut that serves as the 
body ground or negative terminal, refer to 
arrow
2.
4.
Attach one end of the jumper cable minus/– 
to the negative terminal of the battery or to 
an engine or body ground of the vehicle 
providing assistance.
Online Edition for Part-No. 01 41 0 158 448 - © 09/04 BMW AG