BMW 2005 545i Sedan Manual Do Proprietário

 87

0 Lights off
1 Parking lamps
2 Low beams/daytime driving lamps

3 Automatic headlamp control

/

Adaptive Head Light

In switch position

1, the front, rear and side 

vehicle lighting is switched on. You can use the 
parking lamps for parking. For lighting on one 
side for parking as an additional feature, refer to 
page

The low beams are activated in switch 
position

2 only when the engine is running, oth-

erwise only the parking lamps are switched on.

If the vehicle is parked and the headlamps are 
switched off, operating the headlamp flasher 
activates the low beams. You can set the dura-
tion on the Control Display or deactivate the 
function.
Control Center, for principle details, refer to 
page

1.

Open the   menu.

2.

Select "Vehicle settings" and press the 
controller.

3.

Select "Light" and press the controller.

4.

Select "Pathway lighting" and press the 
controller.

5.

Turn the controller to select the corre-
sponding duration.

6.

Press the controller to apply the setting.

If you turn the ignition key to position 0, an 
acoustic signal sounds when you open the 
driver's door for a few seconds to remind you 
that the light has not yet been switched off. 
At the same time a message appears on the 
Control Display.

If so desired, you can leave the light switch in 
the low beam position

2.

Always observe all applicable laws governing 
the use of daytime driving lamps.
You can switch on the parking lamps when 
needed using the standard procedure 
described under Parking lamps.

In the switch position

3, the system activates 

and switches on and off the low beams in 
response to changes in ambient light condi-
tions, for instance, in a tunnel, at dawn and 
dusk, and in rain or snow. Adaptive Head Light

 

is active. The LED next to the symbol is illumi-
nated when the low beams are on.

Online Edition for Part-No. 01 41 0 158 518 - © 09/04 BMW AG