BMW 2005 645Ci Convertible Manual Do Proprietário

Página de 217
 179
OBD Socket
The Onboard Diagnostics OBD interface 
socket is located on the left of the driver's side 
under the instrument panel and under a cover.
The cover has the letters OBD on it.
The purpose of the OBD system is to ensure 
proper operation of the emission control sys-
tem for the vehicle's lifetime. The system mon-
itors emission-related components and sys-
tems for deterioration and malfunction.
An illuminated indicator lamp informs 
you of the need for service, not of the 
need to stop the vehicle. However, the 
systems should be checked by your BMW cen-
ter at the earliest possible opportunity.
Display of the previously described 
malfunction on Canadian models.
Under certain conditions, the indicator 
lamp will blink or flash. This indicates a rather 
severe level of engine misfire. When this 
occurs, you should reduce speed and consult 
the nearest BMW center as soon as possible. 
Severe engine misfire over only a short period 
of time can seriously damage emissions control 
components, especially the catalytic converter.
When the fuel filler cap is not properly 
tightened, the OBD system can detect 
the vapor leak and the indicator lamp will light 
up. If the filler cap is subsequently tightened, 
the indicator lamp should go out within a few 
days.
<
Event Data Recorders
Your vehicle may be equipped with one or more 
sensing and diagnostic modules or a recording 
device capable of recording or transmitting cer-
tain vehicle data or information. In addition, if 
you have a Subscription Service Agreement for 
the BMW Assist system, certain vehicle infor-
mation may be transmitted or recorded in order 
to provide such services.
Care
Important information on care and maintenance 
of your BMW is contained in the Caring for your 
vehicle brochure.
Online Edition for Part-No. 01 41 0 158 445 - © 09/04 BMW AG